|
Is that an AEM EPM on your distributor? Can't tell by the photo. If so one signal is being used for both top and bottom COP's.
I would check that the wiring is not mixed up to the bottom COP's.
Maybe install one lower COP at a time and try re-start to narrow down which ones are crossed.
You could also check electrical continuity at the COP connector. The ECU signal wire should be the same top and bottom. T1 to B1, etc.
__________________
Track: 91 C2 SuperCup wannabe, 08 Cayman S
Street: 85 RUF BTR Slant-nose, 70 911 T Coupe Pastel Blue
Projects: 82 911 SC 3.6, 72 911 T Coupe, 74 914 Signal Orange
|