View Single Post
drkshdw drkshdw is offline
Registered
 
drkshdw's Avatar
 
Join Date: Jun 2017
Location: Michigan
Posts: 781
Quote:
Originally Posted by flatbutt View Post
Given the permitting restriction on size I wonder if a concrete slab would also require a permit?
Good question. I know that the portion of our driveway in the ROW required a permit but the actual driveway on our property did not. With that being said though, ordinance states if the shed is bigger than 10x12 it must be on a concrete foundation with footings. Guess I'll have to call the building department tomorrow and ask about that.

Quote:
Originally Posted by aigel View Post
Given the choice, my wife decided to rather have new bathrooms before I tackle the project... but I did ask the same question a while ago. My takeaway was: Pavers

http://forums.pelicanparts.com/off-topic-discussions/986574-10x12-concrete-slab-shed-diy.html

Cheers,

G
Read your thread earlier tonight actually. Pavers would definitely be easy enough, especially if I decide to move this shed (not likely but you never know). After having torn out a 60 year old concrete garage foundation by hand last spring, I do know that if I go with concrete, it's staying there forever. Not messing with that again.

Quote:
Originally Posted by wdfifteen View Post
For something that small pour piers and then pour a thick reinforced concrete floor. It would be ideal to get the floor up off the grade so it wouldn't be lifted by frost heaving. Not sure how you would do that.
The concrete floor off grade or the shed floor? Even with a concrete pad I'd still do an elevated wood floor with joists just to get the shed off the ground. It'll be sitting at the base of a hill with plenty of runoff so if the concrete were the floor it'd need to be elevated quite high to prevent the shed from leaking.
Old 05-21-2019, 09:53 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #5 (permalink)