[Snitzler]

I just cleaned the heck out of everything. Wire brushes, scotch brite, sanding disks and then xylene and a respirator to get the glue off. BTW, horrible job, I had lots of rust and weird glue. I did some tests to see what worked best and the red covered the crap best. I did the corner because of the seam sealant. It did soften the seam sealer but it hardened up with the paint. Tremclad doesn't require a primer, I think Rustoleum is the same. I had hoped that the surface would be good enough to just paint but it is too rough, I am covering it all with RS carpet. I think someone is going to make some money off of me. I am just not good with carpet, I centered that back piece!