|
I have verified the issue is not the DME relay. I have two and they both do the same. I have also tested the DME relay and it checks out perfectly. The jumper does start the fuel pump but I still do not have a spark. I suspect there may be some issue with the DME ECU but I would hate to spend $700 and find out it is not the problem. On one of the forums I did see a hierarchy of likely issues as follows;
1 - DME Relay - Mine checks out fine.
2 - No power at DME terminal 86 - I have power.
3 - Bad main power line - Mine is fine and delivers power to terminal 30.
4 - Bad speed sensor - I have not checked this out. This may be a possibility as the post said that without a good signal, the DME will shut off the fuel pump. These sensors are not easy to get to.
|