Quote:
Originally Posted by Dpmulvan
Why bust your butt prepping something then use an inferior product to save a couple hundred bucks. In the long run you won't be saving any money.
Why not just do it once the proper way???
Rustoleum and por 15 are for your lawnmower, trailer or lawn furniture.
A quart of two part epoxy or two part etching primer is around a hundred bucks with hardener
A quart of SEM rust shield isn't that much either.
|
If it was in worse condition I would have it stripped entirely and painted professionally, but I'm not taking the glass out or stripping out the seam sealer. Just want to put a coat over everything to ensure no rust spreads and make it look clean. I intend to cover it with carpet as well, so I don't need pristine looking paint (just don't want something that flakes and looks bad).
Quote:
Originally Posted by jjeffries
Whatever you use, please invest in an excellent and appropriate respirator and make sure the space is well ventilated. Sounds obvious, but.....
|
On my to-do list to buy a respirator this weekend.
