[bpu699]

Sorry for the cross post, wasn't sure where to put this:

Sent my 88 930 cams to webcam due to pitting on one cam...

I was told by the prior owner that the motor had SC cams... Motor was modified up the wazoo, running 1.3 bar or so when I bought it...

The power is very linear, not peaky, and I have tracked the car with no issues, no "on/off" turbo spikes, etc.

Webcams called, and said my cams are stock 930 profile?!?!?

I find that really really hard to believe, and they will recheck...

They ran it on a "CAM DOCTOR" machine...

Now the cams, under than 1 lobe, looked great. Minor pitting on one lobe. I have no issues with the way the car drives...

If they are truly stock 930 cams...

Should I leave it? Regrind to SC?

My only issue with regrinding is that I suspect you need to take off a lot of material, and don't want to be left with issues...

Car ran great...