Old Price $16,500
New New Price $11,000. Very motivated to sell
930/07
9.3 to 1
Stock rebuild CIS engine
Total Seal gapless rings set to .015
ARP Headstuds
RS rocker shaft seals
Standard tensioners with safety collars added
Mostly new zinc hardware
Mostly silicone hi temp painted and powder coated
Curil T
Loctite 574 & 562
Corning Molykote 55
NGK BPR7ES
Brad Penn break in oil
All 3 new engine sensors
Special attention paid to any and all oil sealing areas
USB drive with over 100 pics of the build process
Cam timing set exact with digital cam wheel setup from a fellow Pelicanite
Z1 is set at exact TDC
Valves set to .10 +/- .01 with digital dial indicators
My buddy owns a small car dealership in Mass. and he bought this car from the widow of the owner who had the engine rebuilt about 1000 miles or so before he got sick and passed away. This car ran great with no smoking or any leaks so he was getting it ready to sell by detailing it and doing a bit of maintenance such as oil and filter and adjusting the valves and when his guy went to adjust the valves he found a broken head stud.
He got scared off and didn't trust his guys to go through the engine and not screw it up and he'd lose money on the car if he had to pay retail to repair it so he decided to part it out to try and recoup his money.
I bought the engine, trans, suspension and brakes from him for a 914 project.
I found it had a total of 3 broken head studs so I tore it down and found the pistons, heads, and cylinders looked almost new. Based on this and the condition of the rest of the internals like the small end rod bearings I didn't feel the need to split the case but did all of the above work to get it ready to go.
The more I thought about it the more I realized that I wanted a bit more power and ITB EFI so I decided to sell this one and build another one.
Thanks for reading my long winded story and if you have any ????'s I'll do my best to answer them
My email is
Bigtoe32067@yahoo.com
My cell is 832-681-0066. I live out in the country and get horrible cell service so my phone doesn't ring all the time so leave a message and I'll call you back
Tony Moore
Montgomery TX
