Quote:
Originally Posted by nota
not the wind but what is blowing in the wind
btw plywood sheets if nailed or screwed over the OUTSIDE of a window on the wall will blow off
as the wind will get under the corners vibrate the sheet and pull it off
the way to do it is cut the plywood to fit INSIDE the window opening on the sill outside
then use 2x4's split on the angle of your window sill to hold the plywood in place
with topcon screws going 90 deg to the wind into the sill so they can't pull out
of course metal shutters lag bolted in place is better but not a last minute deal to get
|
If that board hit a human and not a tree, it would not be good.
__________________
Glen
49 Year member of the Porsche Club of America
1985 911 Carrera; 2017 Macan
1986 El Camino with Fuel Injected 350 Crate Engine
My Motto: I will never be too old to have a happy childhood!
|