Quote:
Originally Posted by dad911
Post a pic of tile.
It drives me nuts when tile goes around a corner and they don't match the pattern, watch for that.
Where you start is important. I usually center the pattern at the range, then work out from there.
As Iceman said, we use Schluter trim alot. If it's glass tile like a brick/subway tile, you can flip the cut pieces around so the smooth side is out.
|
when I did the corners I cut one side flat and saved the small pieces I cut off.
on the other wall I had the sheet with the staggered ends. I used the pieces I cut off to match the tile from the adjoining wall