|
Hi Roger,
Good to hear from you.
So far I have tested the bike to see if the spark plugs and ignition coils, leads etc are working.
The test was to remove the stick coils on the primary and insert old plugs. They were earthed to the bike.
I started the bike and it ran without issue on secondary plugs alone. There was good blue sparks on the primary spark plugs.
I then reconnected the primary stick coils to the plugs and disconnected the secondary plugs, connected the leads to the old spark plugs and started the bike.
Again the bike ran well.
Revved freely to 5k or so.
Therefore I conclude the coils, leads, plugs, hall sensor are all good.
Still need to check:
-TB balance (but the bike feel fine)
-The wiring is correct from the AF-XiED to computer.
Happy to carry out any checks etc.
How do I check the O2 sensor?
Could be any thing else as well.
As suggested by wswartzwel, I can disconnect AF-XiED and test in standard format.
It seems others have also experienced increased fuel usage.
Regards Mark.
|