[MBEngineering]

HI Zero-H20

your diff has 3 plates in each side;

1X 928 332 555 20 concave washer £12.08 UK

1X 917 332 552 10 1.9mm external drive disc £24.76 UK

1x 917 332 552 11 2.0mm

1X 917 332 551 12 2.1mm depending on which you need

1X 928 332 551 00 drive disc £38.19 UK

you will just need to remove the 2 screws and take the end plate off to get to the parts inside, check the sizes and replace the worn parts.

put 1 drive flang in the vice with 2 CV joint bolts and put the main case of the diff on it, build all the part back into the case with GEAR oil, tighten the end case and fit the Crown wheel, tighten all the bolts, fit the other shaft and make some tool to turn the flange with a torque wrench to check the pre-load, should be 10 to 35Nm or 7 to 25 Lb