|
How old is the grout? You could get a color matched caulk to run along the wood.
I find it hard to believe it’s only 1/16”. It wouldn’t surprise me if you had a variation of 1/16” in level over 5 feet with tile.
Even if it is only a 1/16” difference, it’s not a tripping hazard but there is some possibility of damage or chipping to the tile if the edge of the tile isn’t captured.
At a minimum, I would use a schluter strip against the tile with the anchoring leg turned under the wood and screwed to the subfloor. Route out the underside of the floor to accommodate the thickness of the schluter strip. Using felt paper for shimming is the way to do adjust the elevation.
There’s a ton of profiles in varying finishes that you could choose from including reducers. Go to a tile store, not a big box for a full selection.
Sent from my iPhone using Tapatalk
|