|
Thanks all. Yes, this is a full build, I will need to tear the car apart for paint but checking that everything can be aligned properly before doing so. I've aligned the doors and fenders to get the proper gaps everywhere already.
I completely removed all of the bolts and just positioned the frame by hand to see what's going on. If I do so I can get a very nice 1/4" gap around the entire frame, but the bottom rear section of the frame is resting right against the door panel well behind the screw hole in the door bottom, so I do think the frame itself needs a bit of "adjustment". If I put all of the screws in, but leave them loose so that I can move the frame around by hand there is no way I can get it to align properly.
Bill
|