Quote:
Originally Posted by kach22i
Example Situation: I drive a rusty old pickup truck, and the ground wire for the rear tail light keeps going bad because the frame is rusting.
This results in a dim right rear tail light and an open circuit I suspect, as the blinker flashes too fast on that side as well.
I've ground with a grinder to a bright sheen that part of the frame 2-3 times in the past 10-years, and redid the wiring connection at the same time.
Last time I coated the connection with something to retard re-rusting the connection - but it didn't hold for more than a couple of years.
Would Boeshield T-9 extend the life of this ground wire and bolted connection to the truck's steel frame?
Will it seal out moisture, or is it mostly a lubricant?
|
No made for that application to protect the ground wire.