Quote:
Originally Posted by Bulldog85043
Checked the fuses and found F31-35 were not giving me a voltage reading on ether terminal. Going to replace those now.
|
Wait, if a fuse is not showing voltage on either side, then it's not the fuse that's the problem. It's whatever is supposed to send power to that fuse. In an old car like my 914, that would either be a relay or a switch, but I'm not sure about the MINI.
I would advise digging into a wiring diagram so you can see where the power to those fuses comes from. And it might even be that they aren't supposed to be powered unless some specific set of circumstances (e.g., switch A on and switch B off or some such).
--DD