I recently replaced a clutch in a 87 911 carrera because the rubber bushing on the OEM clutch disk failed. The car drove perfectly fine before, just the loud click when letting out the clutch due to the bushing. After replacing clutch disk(updated spring type), pressure plate, release bearing, pilot bearing, and resurfacing the flywheel, everything went in smoothly. Now the worst, with the car running I can not get into 1st or 2nd or reverse. I can force it into 3rd 4th and 5th but it has to be forced. when the car is off, i can go into all gears smoothly.
If i put it in 1st gear with the car off, i can start the car with no serious jolt, from there the clutch feels normal, once i take it out of 1st, it will not go back in.
I have replaced many clutches on various cars and have never had an issue, i am hoping there is a common issue or maybe someone has experienced this.
I vacuum bled the hydraulic system completely.
clutch kit part # 950 116 911 01
