|
It looks like the fork is in the right place. I can physically see the pressure plate springs pull off the clutch via the inspection holes on the driver side of the car. A buddy of mine reffered his friend to come over and inspect the car who has been working as a porsche tech for 30 plus years and told me the clutch is working properly and has advised me to try filling it with swepco fluid. Says maybe the syncros are not lining up correctly. I hope thats the issue. Im going to give this a try before pulling everything out, double checking my work, and sending the transmission to a gear shop. Im almost tempted to putting the old clutch, pressure plate, and bearing in to see if it works again.
And thanks KTL for the info and the documents. Im going to try that first. Really apreciate you all for taking the time to shed knowledge.
Last edited by Mr.Ebola; 12-18-2019 at 06:55 PM..
|