|
How thick is the S/S?
Keep your blade cutting speed low, full speed will only build heat and burn up the blade. As Java said plywood will help, ply on both sides clamped will smoke a bit but it will keep the metal from flexing.
You could also tale a 4 1/2 angle grinder to it with a slitting disk to open up a 13.5" rough hole using plunge cuts and then slowly grind up to your 14", need good abrasive disk designed for stainless use to avoid leaving burn marks on the S/S. Make sure you wear safety glasses.
__________________
87 930,
|