[eholz1]

Hello All,

I just had my odometer fixed in my 1984 Porsche CArrera 3.2. (maybe)
I have the Benton manual for the car, it seems to show wiring for the speedo.

It appears that my wiring is different - and the speedo may not be fixed.
I plan to send the speedo out to be rechecked, etc.

The Benton manual shows a brown/red wire going to ground (from the sending unit).
and two brown red wires on a connector on the speedo - one goes to the sending unit and the other goes to the Tach (perhaps the shift light).

There is no mistaking the wires white/red and red/black.

There is another wire - which comes out of the harness, it is black/blue stripe - it appears to have been connected to the two brn/red wires.

In any case I have tried all combinations - and the speedo and odo appear not to work. The speedo was working BEFORE I sent it in - it was the odometer that quit working.

Any suggestions on how to get things working? Is it possible driving the car with out the speedo damaged the sending unit?

Thanks,
eholz1