Thanks for the ideas and suggestions. Problem is I don’t have a welder so that’s out of the question. Bodyshops here want to charge $1000. Looks like someone put a big screw in. How successful is the screw and slide hammer technique?
Also the next issue this baby has is oscillating idle. Cold or hot start is fine. After about 5 mins it starts this oscillating idle. Not rough like a miss but not smooth. I can very faintly hear a vacuum leak from the top of the engine but I’m not sure if it’s normal or not. The air filter is KN, oil filter is new so I’ll throw a fuel filter at it a see if it helps.
After pressure washing the engine and running it for a while I see no evidence of an oil leak. Top and bottom is dry.
Sent from my iPhone using Tapatalk