|
Model Citizen
Join Date: May 2007
Location: The Voodoo Lounge
Posts: 19,498
|
Your bike has a bolt at the seat stay (seen in the picture, it's above the drive side dropout) to split the frame to remove the belt. It's actually easier than removing a linked chain.
This is a driveline belt for a bike. It's not an automotive belt, it is a belt specifically made for a bicycle. There are differences in the quality of the belts you can buy, but there are standards as to the length, and the profile of the teeth.
Count the teeth on the belt to determine the length of bicycle drivetrain belt that you need.
__________________
"I would be a tone-deaf heathen if I didn't call the engine astounding. If it had been invented solely to make noise, there would be shrines to it in Rome"
Last edited by herr_oberst; 02-13-2020 at 03:33 PM..
|