Quote:
Originally Posted by HarryD
Dick,
My original level sender started acting all kinds of crazy. I finally replaced it with a new unit.
When I first checked it against the dip stick, it was reading high. I pulled it back out and compared the bend of the arm in the old one against the new one when at full droop. I needed to bend the new arm slightly to get the same geometry. All is well now.
FWIW, you do NOT need to drain the oil to change the sender.
|
Good advice. I will check that on my install.
I know I don't have to change the oil for install. this time I just need to do both as the oil change is over due.