|
Registered
Join Date: Oct 2001
Location: San Carlos, CA US
Posts: 5,578
|
There are several methods, one is more aggressive than the other.
1) Oxy acetolene torch. At the right temperature, the outer race falls off. Forget the smaller propane torch.
2) Bearing puller like the picture above.
3) Cut two grooves, finish off with a cold chisel.
__________________
Porsche 2005 GT3, 2006 997S with bore-scoring
Exotic: Ferrari F360F1 TDF, Ferrari 328 GTS
Disposable Car: BMW 530xiT, 2008 Mini Cooper S
Two-wheel art: Ducati 907IE, Ducati 851
|