Quote:
Originally Posted by LEAKYSEALS951
I was just thinking that yesterday too, but the zerks are rusted into place. I'm concerned they might break. Happened another deck snap off about a year ago.
|
Try hitting them with penetrating oil. A broken zerk isn't the end of the world. Just take a chisel, grind a tapered square on the end then drive it into the broken off zerk. You should be able to back out the threaded part by doing this. Something else, bump it with some heat and then try removing the zerk. Just be careful that you don't get things so warm you start melting grease seals.