[dap930]

Rahl,

Part number for the 930 shaft is 930.107.143.00, is superseded by 930.107.143.03 used on the later 964/993/996 pumps. Found an old post by Bill Verburg that states a 964 pump puts out 65 liters/min and the 930 pump puts out 100 liters/min. But looking at pictures of these two pumps, the pump sections look the same length. So, I don't know if the 100 liters/min is accurate. At any rate the 1976 pump section is almost half the size of the 930 pump. I updated to the 930 pump because I had larger C2 (964) piston squirters installed in the case.