Quote:
Originally Posted by FrankM_
If you remove the relay and put the lights on, you should see 12V over terminal 85 (yellow or white wire) and 86 (brown) of each socket.
Meter on ohms/continuity :
the brown wire, pins 86 of each relay holder should have continuity to ground (measure at any ground point)
Pins85 (yellow & white wire) should have NO continuity to ground when the lights are switched off
|
Thanks for this comment. Helped me understand my Foglight troubleshooting on another thread. I always though that pin 85 is ground and power should come to pin 86 when the foglight switch is pulled. Mine works as per your direction above, although it makes no sense to me at the moment. I need to sit down and try and understand the logic.