|
Registered
Join Date: Dec 2012
Location: Motor City area
Posts: 617
|
mcchesneyc: thank you very much for taking a look at my mess.
The rear track has been pushed all the way outboard; as far as it can go without removing the door skin and .... (I will withhold my sarcasm....).
The front track had 3 shims. I’ve removed all 3 Shims, and Ive pushed the front track as far outboard as I can without adding the shims back in to the equation.
In thinking about this alignment in sum: there has to be a way to get this right ... Ive seen many of these cars that are more sorted; and they don’t have gaps like this.
I will have to play with it again tomorrow to see if I can come up with a correct combination.
__________________
'The forever project car - 1979 911SC targa - getting it running right was a task, read about it here: http://forums.pelicanparts.com/911-engine-rebuilding-forum/722362-dads-911sc-i-am-finishing-rebuild-long.html
Other cars: 1993 Corvette LT-4/ZF6, polo green. 22 Ranger 4x4 with a couple cool things.
Last edited by Robey5; 04-11-2020 at 08:09 PM..
|