Absolutely! It took me about an hour or so from start to finish. You will most likely have to remove your muffler. I didn’t in my case because my turbo car does not have a muffler. But there are 2 bolts holding the compressor mount to the engine console. Pull. The compressor off, then the top fasteners for the mount. It pulls right out of the top. Undo your oil lines and pull the block out. Not that hard.
Quote:
Originally Posted by FrankM_
Can you do that without dropping the engine ? I am hesitating on doing this as most treads show replacing it on cars without A/C or on an engine out of the car.
|