[0172XCarrera]

Hey Guys and Gals - I'm elbow deep into replacing the original Beru wires on my '84 3.2 with Clewett Engineering wires purchased through our host. I could use some "lesson's learned" from those who have been there already. I'm on the verge of breaking the wire separators to get them off the old wires and felt like I needed to back off and seek experienced recommendations. The Clewett site has nothing to offer in their tech section and there have been no YouTube results or other posts that I can find. I'd appreciate any photos and stories of how any of you that may have tackled this project got through it and how it turned out. - Thanks ! Jim