Quote:
Originally Posted by Buzzard95
When I bought my clutch parts from Pelican for my 88 911, a bought a tube of High Performance Grease made by Sachs based on my interaction with the PP Porsche specialist. Is this not the correct grease for the splines and also the clutch fork bearings?
|
Quote:
Originally Posted by Buzzard95
Since nobody answered my previous question so far, I am posting a picture of what I received with my Pelican Parts clutch order. Would someone please tell me if this not correct for my 88 911 G50 and why?  |
The High Performance Grease made by Sachs is the correct grease for the clutch splines.
TSBs 8805 Lubrication of Clutch Parts and 8902 Modified Clutch Release Lever Shaft Bearings (for G50) call for the release lever and the contact points between the release bearing and release lever use Olista Longtime 3EP grease 000-043-024-00. This grease has been superseded to
Porsche Extreme Pressure Grease 000-043-305-73.
Note that Technical Bulletin 3 911 Clutch Release Bearing for Carrera 1987-89 indicates that the guide tube and sliding surface of the release bearing should not be lubricated.
Edit
8902 Modified Clutch Release Lever Shaft Bearings (for G50) also has the release shaft bearings and the shaft cap/cover filled with 3EP grease.