View Single Post
Jonny042 Jonny042 is offline
(man/dude)
 
Jonny042's Avatar
 
Join Date: Aug 2010
Location: Thunder Bay, ON
Posts: 5,500
Garage
Quote:
Originally Posted by scootermcrad View Post
Driving video!! YES! Congrats, man!
Thanks, Scott!! I promise more/better video soon...... BUT. Goddamn Beru plug wires are junk. I thought I had them sorted but they are still falling apart. They've caused more grief than anything else on this break-in phase so they are going in the bin. The car is going on stands for a decent check-over/valve adjust/head stud check before I run it again. A bit premature but I need to do something while the Clewett plug wires arrive.

Going to also go through the entire car top to bottom to make sure nothing has come loose and all is good before driving it any more.

The MFI tuning WAS going well. Car starts reliably from cold, idles, and yesterday I put a good 50km on it without any drama and without having to drive around any rich or lean spot. Full throttle AFR between 13.5 and 12.5. Still continues to impress..... then it started to run poorly and miss at full throttle so I limped back to the shop and going to sort out the plug wires before I do any more tuning.
__________________
Heavy Metal! Part Deux - The Carbon Copy
Project Heavy Metal https://tinyurl.com/57zwayzw (SOLD)
85 Coupe - The Rot Rod! AX beater
Quality Carbon Fiber Parts for Classic 911s: instagram.com/jonny_rotten_911
Old 05-30-2020, 06:23 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #1250 (permalink)