View Single Post
Flat6pac Flat6pac is offline
Join Date: Oct 2008
Location: Nash County, NC.
Posts: 7,835
The first thing I would do is remove the 2 arms off the vertical shaft. The upper one tends to bind on the shaft and doesn’t permit necessary movement. Pull the upper arm and clean the parts with scouchbrite then anti seize lube. Put it back together, reload the cable and spring and set gap.
Now you know the adjustments will respond.
Old 06-24-2020, 05:41 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #3 (permalink)