Quote:
Originally Posted by Sharkbitemarky
The pulley is warped /bent very slightly, so if I put a clock on the outer face of it it would deviate about the circumference by about 1mm.
Nothing is loose
It is not end play, it does not move front to back.
With regards to a picture, I presumed people would know what a crank pulley looked like. The problem will not be seen in a picture or video.
Cheers
Mark
|
Mark,
This is much better. Did you mean a dial indicator when you said “clock”? If the crankshaft pulley wobbles more than you like, simply replace it. What model is your car/engine? Do an engine partial drop to remove the front engine tin, engine console, and finally the crankshaft pulley. Make sure you test the replacement pulley before you install it.
Tony