Quote:
Originally Posted by Spring44
The pump seal kit is only about $25 and takes an hour or less to install and there are good videos on the topic. The pump will never be easier to access than it is right now with the engine out.
The rack reseal is higher on the difficultly scale, especially removing the old seals from deep down in a long tube, but it is doable. The kit is $80-90.
Good luck!
|
I agree, definaely do the pump seals, and while the fluid is out, I would also recommend replacing any of the rubber lines with tranny line using fuel line clamps or spring clamps as you don't want weeping lines. Except for the pressure line, (they do rupture) that one needs to be replaced with the crimp collar type. The fluid resovoir has a filter in it, may want to replace that too.