|
The plug you have to remove is Alu.plug not plastic.it is held in with a C clip on it`s end.The best how i do it is ,drill 2 little hole about 4mm between then use needle nose pliers and pull it out.Pretty safe stuff no worries.Once you have it check the fuel mix and adjust it,as it is on the manual instructions.
Still,if you want to duplicate the wet condition as i have suggested get a spray bottle with water and while the engine is running spray on each cyl..you see any miss right away...
Ivan
__________________
1985 911 with original 502 191 miles...808 198 km
"The difference between genius and stupidity is that, genius has its limits". Albert Einstein.
|