|
Registered
Join Date: Dec 2007
Location: Just a little north of 13669/Nation's capital
Posts: 1,330
|
Another consideration, as you are not using the original cylinders, if their heights are not exactly the same, you could run into cam binding issues. To ensure the cams turn smoothly, best to assemble heads & cam cases (dry) on the cylinders and torque to spec. Then insert the cams to determine if they turn freely. If all OK, then disassemble & assemble with appropriate sealer of your choice. Sure, it takes some extra time but you will be confident in the job done right.
__________________
1986 Targa Guards Red
2021 MT09 SP
|