Quote:
Originally Posted by jpgroth
I'm having a difficult time with the ITBs closing on their own. It takes some effort to turn the center pivot by hand. Are the manifold nuts you are referencing, the nuts holding the ITB assembly to the intake manifold?
|
Correct, disconnect the center pivot so it's just the linkage on each bank connected. Loosed the nuts holding the ITBs to the manifold and exercise the linkage. This should help straighten out and align the ITBs, then tighten them down.
Quote:
Originally Posted by jpgroth
I also saw you mentioned the fuel rail bracket being straight.. Any tips from anyone that had trouble with this would be great!
|
You can try loosening the screws holding the fuel rail on, and doing the same as outlined above, then re-tightening.
Both things should relive any binding.