Quote:
Originally Posted by red-beard
I need to do this, but also replace the seat under the flapper
|
I need to do this too.
Those in warmer climates might consider insulation on the inside of the bowl to prevent sweating/drips when it fills up with cold water.
(unless A/C is run of course)
Painted part of the outside garage floor with Lowes Valspar floor paint. Brick red for a little warmth. Supposed to have polymers for strength.
(Floor is trashed so anything is better than the 12yo stuff on there.)
Five days later, and it's still tacky to the touch.
It's still not drying despite all hot dry days.
The odd thing is that I also had a newer unopened can that turned into a brick.