|
Registered
Join Date: Jul 2001
Location: mt. vernon Wa. USA
Posts: 8,761
|
I've recently tested the Microsquirt logic level outputs with smart COPs, 2-wire dumb cops with QuadSpark igniters and firing an EDIS-6 coil. I started out with the recommended 1Kohm resistor and got intermittent spark from output C. Once I installed a 125ohm, 1/2W resistor and ignition output C came to life and all of these ignition options all seemed to work well.
https://www.youtube.com/watch?v=S1TUpoc43co
https://www.youtube.com/watch?v=K095f-5ZNVA
regards,
al
Note: I found two different resistor values documented for the Microsquirt. 1Kohm (Microsquirt hardware manual) and 100ohm..........(DIYAutotune Ignition instructions)
__________________
[B]Current projects: 69-911.5, Previous:73 911X (off to SanFrancisco/racing in Germany).77 911S (NY), 71E (France/Corsica), 66-912 ( France), 1970 914X (Wisconsin) 76 911S roller..off to Florida/Germany
RGruppe #669
http://www.x-faktory.com/
Last edited by al lkosmal; 09-09-2020 at 10:34 AM..
|