Hi guys. First I have read a lot on people which have a NO DROP (which isn't my case) but I didn't find a lot of threads on people which the window doesn't drop enough.
Problem with the window, passenger side.
What is working:
(Door closed) - Lowering and raising the window completely.
(Door open) - Raising the window, the window stop at the good place to close the door and then the window raise. Each time
Not working:
(Door closed) - Window drop about 1/8".
I can hear the motor activating the drop but for a very short time. My door panel is also removed. I have about 1/4" dropped between the stoppers.
When I lower the window and then I raise it, the window stop at the good position as mentioned in the What is working, and between the stoppers I have a good 2" maybe I didn't measured it but that's a lot compared to when I want to open the door.
I tried to reset the window position holding the window button, I also tried to stretch the cable..
Why the window it stopping properly when raising it, but when I want to open the door, the drop is not correct..
