Some temporary rustproofing.
I originally wanted to spray with Eastwood frame paint or undercoating, but chose the lazy solution while the weather is still warm.
I used two cans of Fluid Film (lanolin spray wax probably similar to Waxoyl) from Menards on the important bits and surfaces.
-The outside of this tiny car probably needed at least 5 cans.
-The company also sells a 180deg 24" spray tube which will feed into frame rails when attached to a wire.
I got a bit on the critical exhaust points/bolts. Oops.
That was done on purpose.
First ran it a few blocks and let it evaporate off while cooling.
No fire but I had an extinguisher in the front seat just in case.
The Honda Fit is made of tin metal.
Lots of crevasses and connections..
