Quote:
Originally Posted by AndreasK
Holes in bumper was plugged with a JB weld type "metal".
|
Thank you for the information.
When I took my bumperettes off the steel bolts in them had expanded/rust and made the hole in the aluminum bumper irregular and enlarged.
I cleaned and then filled the hole with an epoxy faux metal in a small cylindrical container, similar to the below.
https://www.jbweld.com/product/steelstik-epoxy-putty-stick
I think there might be better ways to do it, so thought I would ask.
I do like your wheel flares, not standard SC and would keep them.