|
I would rather be driving
Join Date: Apr 2000
Location: Austin, TX
Posts: 9,108
|
What about drilling through to 21mm and then inserting an M12x1.5 stand off spacer. I am going to guess that the 21mm drill will cut through the outside walls of the bracket. Then you can easily lay a weld bead across the "punch through" securing the standoff spacer on both sides. Rosette weld the perimeter of the spacer on the mounting face and grind flush. This would be strong and relatively easy to install.
https://www.mcmaster.com/metric-standoffs/thread-size~m12/pitch~1-5-mm/
https://www.belmetric.com/fine-thread-couplers-c-563_578_1299_1809/nlong12x15x30ss-fine-standoff-hex-nut-stainless-p-13852.html?zenid=58eefr4u0hh2i7usj34823vjf7
__________________
Jamie - I can explain it to you. But I can not understand it for you.
71 911T SWT - Sun and Fun Mobile
72 911T project car. "Minne" - A tangy version of tangerine #projectminne
classicautowerks.com - EFI conversion parts and suspension setups. IG Classicautowerks
|