|
Registered
Join Date: May 2002
Location: Santa Barbara, CA
Posts: 4,821
|
Dwell is not important for the simulator. The 3-pin CDI will release its spark at the exact moment when the points open. The simulator most likely has an IGBT or MOSFET that switches on and off with at the given frequency and a certain duty cycle. Once the device turns off the spark is triggered regardless of whether the duty cycle of the signal is 60/40 or 40/60.
Ingo
__________________
1974 Targa 3.6, 2001 C4 (sold), 2019 GT3RS, 2000 ML430
I repair/rebuild Bosch CDI Boxes and Porsche Motronic DMEs
Porsche "Hammer" or Porsche PST2, PIWIS III - I can help!!
How about a NoBadDays DualChip for 964 or '95 993
|