Quote:
Originally Posted by Mdleder
I am a new owner of a 77’ 911 and just took my first long trip of 500 miles. It’s a relatively low mile car that wasn’t used much in the last few years so I was expecting that after some stretching of the legs some things would pop up. Well I developed an oil leak from a hose at a connection between two fittings.
As a relatively new owner I need some clarification as to what the hose name is. Leak is coming form the connection point and not the rubber hose itself.
It is the hose just in front of the engine oil cooler.
Can somebody identify the proper name of the hose. To fix the leak does it require replacement of the entire hose or just the seal between the connection points? Is the seal formed by a crush washer, o ring, flat faced seal. Picture with this points has the connection and hose in question circled, relative to some of known parts on the right side of the car. I appreciate any and all help  |
I see you’re new to these forums. As a courtesy you shouldn’t hijack an unrelated thread. You cut and pasted your same question to two different threads having nothing to do with your dilemma. Post your own thread and it will get the attention you need. Also, download a 1977 PET to get part numbers and diagrams. Hope that helps.