Quote:
Originally Posted by HardDrive
PLA would not be a good material, truth. Frankly PETG is questionable as well, but certainly better than PLA. I can hypothetically print in ABS, but I have not tried it before.
|
I tried ABS in my ender and it ended in failure. Checking U tube it seems that making a enclosure with good enviromental temperature control might do the trick, maybe.
In the category of useful info: Printing Flexible/ squishy stuff.
I did have success with TPU. I made a carb boot that allowed me to adapt a 38m Lectron carb to a Boyesen Rad valve intake on a big bore CR 125 project.
I used SainSmart TPU
https://www.amazon.com/gp/product/B00TI3JUVA/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1
It was one of the higher durometer TPUs and I had no issue feeding.
My 5 min of research found that the really squishy stuff needs a direct drive head.