|
Your truly washed a pair of pants once with some sharp screws in them, which promptly fell out of my pants, got caught in the small holes in the bottom of the machine, and cut through the washing machine tub while it spun.
This tub was the "non bondable" plastic. I disassembled the plastic tub to gain access, and used a simple soldering iron like a hot knife to weld it. It's held for about 6-8 years so far. The trick was to treat the plastic like welding a bead, meaning both sides had to melt into one another to get a good bond. Once cold, it was still flexible. Ithink I even added in some extra plastic like a welding stick.
(I'm guessing it's like the video posted above- I didn't watch it yet..)
Last edited by LEAKYSEALS951; 10-13-2020 at 03:44 PM..
|