|
Registered
Join Date: Aug 2010
Location: Earth.............
Posts: 2,901
|
Quote:
Originally Posted by hot wheels
On my 2007 cayman I put a new flywheel on, torqued the bolts to 19.00 ft pounds marked 120 degree marks on each bolt and began the final tightening. I'm using a 2ft breaker bar to get to the mark. I'm up to about 90 degrees on each bolt. I'm pulling so hard on the breaker bar I'm afraid I'm going to snap the bolt before I get to the mark
My question is, Is this normal?? should I keep going?
|
Yup.
__________________
Accrochez-vous bien de vos rêves..........."
|