Quote:
Originally Posted by myslateblue911
I got the distributor out and I replaced the green wire. Getting the distributor back in the car is proving difficult. I have got it in but I can't get it to set down about the last 2 inches. Any tips for getting the distributor back in the car and installed all the way down?
|
If the o-ring is new you will have some resistance when getting it back in place. Lubricate the lower part of the dist and also the o-ring (I used motor oil). Once you are sure everything is lined up and you can't push it any further, use a wood block and a rubber mallet to very gently tap it in the rest of the way. Good luck! Hope you get it back on the road soon.