Woodworking vice is quick release. Turn the handle to the left, you can literally pull it straight out 14" in half second. Insert piect, push back up against work piece in half second, 1/4 turn of the handle to tighten is all you will need. The other type of vice requires you to stand there, turn it all day to get it to open and tighten. Woodworking vice allow you to lay the piece flat on the table to drill, sand, whatever. I have a few old ones hanging around that needs cleaning. They are the old fashion, heavy duty commercial vice. They are worth a couple hundred bucks but if you are willing to get your hands dirty with a can of oil and a steel wool pad, its my house warming gift to you. Its heavy but you will have to pay for shippping. Its A LOT better then most on the market today.
like this one
https://www.ebay.com/itm/WILTON-4-Deep-x-7-Wide-Vintage-Woodworkers-Bench-Vise-1-Diam-Screw/254751456527?hash=item3b505ebd0f:g:kU0AAOSwKVtcrRr j